Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Derailleurs

Campagnolo EPS Front Derailleur Stiffener
$85.00
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
Campagnolo Chorus S2 Braze-On Front Derailleur
$90.00
One derailleur, multiple gearing options. Campagnolo's Chorus S2 Front Derailleur is compatible with both standard and compact cranksets. This design requires less hand movement, facilitating better up-shifts to the big chainring. The light molded alloy cage has a plate on the tip of the outer cage to silence shifts. The S2 (Secure Shifting) System features an additional component on the derailleur that increases stiffness. - Drivetrain speeds: 11 - Derailleur capacity: 16T - Min/Max: 34/53T - Double or triple: Double - Only Compatible with 2015+ Campagnolo Chorus, Record, and Super Record
Campagnolo Super Record EPS Braze-On Front Derailleur
$735.00
Campagnolo's Super Record EPS Braze-On Front Derailleur delivers electronic precision to your front shifts. Hammer into the big ring and surge forward with a mere touch of a button, under heavy load or out of the saddle it's still as smooth as a dream. An aluminum internal cage plate and external carbon cage is powered by a servo motor to provide the incredibly quick shifting. It's versatile too, working with both standard and compact cranksets and auto-trimming to eliminate chain rub. - Drivetrain speeds: 11 - Derailleur capacity: 16T - Max ring (teeth): 55T - Double or triple: Double - Waterproof to 1 meter for 30 minutes (IP67 rated) - Weight: 127g
K-Edge K-EDGE 1x Mountain Chain Guide
$99.99
K-EDGE MTB Chain Guide is built to be the strongest and lightest solution to withstand the pedaling force of a derailed single ring chain in World Cup race conditions. - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - “Hard to fit kits” may be needed for current applications, please contact Info@k-edge.com - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
Microshift Mezzo Front Derailleur
$10.99
Mezzo front derailleurs offer durable construction and seamless compatibility with existing systems, making repairs and upgrades easy. - Aluminum bracket, plastic body - Includes 31.8mm clamp adapter
Microshift M21 Rear Derailleur
$12.99
M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs. - Robust composite and steel construction - Compatible with Shimano 6- and 7-speed mountain and road systems
Microshift M21 Rear Derailleur
$12.99
M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs. - Robust composite and steel construction - Compatible with Shimano 6- and 7-speed mountain and road systems - Long cage for double or triple cranksets and 32T max cassette cog - Includes frame hanger attachment for use with older frame designs
Microshift M26 Rear Derailleur
$20.00
M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. These legendary M26 rear derailleurs put cyclists of all ages back on their saddles with as little frustration as possible. - Robust composite and steel construction - Compatible with Shimano 7, 8, and 9-speed mountain and road systems
Microshift R8 Front Derailleur
$20.99
R8 front derailleurs feature a cold forged aluminum body and are optimized for 7 and 8-speed chains and Shimano-compatible road shifters.
Microshift Mezzo Rear Derailleur
$24.00
M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. These Mezzo rear derailleurs are light, robust, and reliable. You can count on them to get any bike on the road. - Weight-saving aluminum bracket body and outer link - Steel pulley cage for extra chain-rub durability - Compatible with Shimano 7, 8, and 9-speed mountain and road systems
Microshift R9 Front Derailleur
$27.99
Optimized for Shimano compatible 9-speed road drivetrains, R9 front derailleurs feature metal construction and rapid shifting response. - Cold-forged aluminum body
Microshift Marvo LT Rear Derailleur
$29.99
M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. Marvo LT rear derailleurs are built with precision rigid aluminum construction. Let these miracle workers get any bike rolling again. - Lightweight aluminum construction - Steel pulley cage for extra chain-rub durability - Compatible with Shimano 7, 8, and 9-speed mountain and road systems
Microshift R10 Rear Derailleur
$38.99 - $44.99
R-series rear derailleurs are designed to work with 7, 8, 9, and 10-speed Shimano-compatible road shifters. These R10 aluminum rear derailleurs are lightweight, precision CNC-machined, robust, and can get any bike back on the road. - Lightweight all-aluminum construction - Compatible with Shimano 7, 8, 9, and 10-speed road systems - Not compatible with Shimano Tiagra 4700 road system - Short cage for double crankset and 28T max cog - Medium cage for double crankset and 34T max cog
Microshift ADVENT Rear Derailleur
$52.00
Not everyone needs the added chain retention of a clutch derailleur. For those riders, we offer a non-clutch version of our innovative ADVENT derailleur. Without the clutch in the system, the shifting effort at the lever is reduced. While still capable of handling an 11-42T cassette, the rear derailleur is the perfect choice for commuter or touring bikes that can benefit from using a wide-range gearing system. - Direct cable routing for smooth and responsive shifting - No clutch for ultra-smooth shifting - Compatible with 11-42T 9-speed cassettes - Compatible with ADVENT shifters only
Microshift ADVENT Rear Derailleur w/Clutch
$59.99 - $64.99
Designed with the rider in mind, the ADVENT rear derailleur packs trail-ready features into an attainable wide-range drivetrain system. The derailleur kinematics are precisely tuned to use a more direct cable path, making the shifting feel consistent across the lowest and highest gears, and everything in between. - Clutch provides stronger chain management over rough terrain - Ratchet-and-pawl clutch is easily adjustable and repairable - Direct cable routing for smooth, responsive shifting - Compatible with 11-42T 9-speed cassettes - Compatible with ADVENT shifters only
Microshift ADVENT X Rear Derailleur
$76.99
With a race-worthy weight and the right gearing for any situation, microSHIFT's top-of-the-line ADVENT X rear derailleur delivers high-end performance without high-end headaches. By using a 10-speed chain and wide range 11-48T cassette with predictable, evenly spaced gear steps, ADVENT X allows you to find the right gear even in challenging conditions. Add in microSHIFT's proprietary ratchet-and-pawl clutch, larger pulleys with taller teeth for better chain retention, and metric adjustment hardware, and you've got everything you want and nothing you don't. - Compatible with ADVENT X 10-speed drivetrains only - Compatible with standard 10-speed chains - Ratchet-and-pawl clutch provides chain security and can be turned on and off with a switch - Metric adjustment hardware - Larger pulley and taller teeth for better chain security and higher ride height
Paul Component Engineering Melvin Chain Tensioner
$90.00
- Machined aluminum tensioner bolts on to derailleur hanger - Adjustable spring tension and dual floating pulley - For frames with vertical dropouts - Fits hubs with 22-28Mm chainline (From inside of dropout) - Made in USA
SRAM X4 7-/8-Speed Rear Derailleur
$34.00
SRAM's X4 Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum and steel construction delivers through the roughest trail, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.
SRAM GX 2x11 Front Derailleur (High Direct-mount, Bottom-pull)
$39.00
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically for SRAM 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11-speed rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams
SRAM GX 2x11 Front Derailleur (Low Direct-mount, Bottom-pull)
$39.00
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically around SRAM's 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible, so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams
SRAM X5 10-Speed Rear Derailleur
$49.00
SRAM's X5 10-Speed Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum construction keeps the weight down, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts.
SRAM Apex Rear Derailleur (Medium-cage)
$55.00 - $58.00
SRAM's Apex Rear Derailleur features cold-forged aluminum construction for sweet shifting, dependability and low weight. Designed for SRAM's 10-speed road drivetrains and featuring their Exact Actuation Technology, Apex will provide you with perfect shifting every time.
SRAM Apex Rear Derailleur (Short-cage)
$81.00
SRAM's Apex Rear Derailleur features cold-forged aluminum construction for sweet shifting, dependability and low weight. Designed for SRAM's 10-speed road drivetrains and featuring their Exact Actuation Technology, Apex will provide you with perfect shifting every time.
SRAM Apex Rear Derailleur (Short-cage)
$81.00
SRAM's Apex Rear Derailleur features cold-forged aluminum construction for sweet shifting, dependability and low weight. Designed for SRAM's 10-speed road drivetrains and featuring their Exact Actuation Technology, Apex will provide you with perfect shifting every time.
SRAM SX Eagle Rear Derailleur
$85.00
The SX Eagle derailleur features the proven SRAM 1x-specific X-HORIZON design and easily facilitates 11-50T and 10-52T cassette capacity, providing quiet, consistent performance and durability. - X-SYNC pulley technology provides greater efficiency, crisper shifting, and quieter operation. - Cage Lock offers discovery-level riders easy trailside wheel removal.
SRAM NX Eagle Rear Derailleur
$107.00
This new NX Eagle derailleur features the proven SRAM 1x-specific X-HORIZON design. The larger, 14-tooth X-SYNC lower pulley easily facilitates 11- to 50- and 10- to 50-tooth cassette capacity, and also adds to NX Eagle's overall smooth-pedaling feel. The Type-3 ROLLER BEARING CLUTCH provides quiet, consistent performance and durability. - Eagle technology provides an expanded, optimum, gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents - Eagle is a complete drivetrain system that was developed to be an integrated high-performance ecosystem. The engineering and testing that went into the development provide for maximum performance, safety, and long-term durability to ensure a great consumer ride experience. We guarantee this performance when Eagle drivetrains are used as a complete ecosystem. For additional information, please contact your SRAM Sales Contact. - Completely new rear derailleur incorporating our proven X-HORIZON design and new Type-3 ROLLER BEARING CLUTCH technology - Eagle ecosystem-engineered mounting system and CAGE LOCK positioning add robustness - Eagle pulley technology provides greater efficiency, crisper shifting and quieter operation - Speed (RD): 12s - Cable pull ratio: X-actuation - Cage (RD): Long - Max tooth: 50 - Color (RD): Black - Pulley bearings material: Steel - Cage material (RD): Steel
SRAM GX Eagle Rear Derailleur
$125.00
Riders want the derailleur to do its job shifting on command, whether under climbing load or the stage finish. The GX Eagle derailleur gets it done with an updated cage architecture that improves chain management. Refined to work with the new 10-52T cassettes, it's also backward-compatible with 10-50T cassettes for greater versatility and incremental upgrade. It's finished with the new GX Eagle master colorway to complement any cassette and chain colorway a rider wants from the Eagle Colorsystem. - Backward-compatible—works with both 10-50T and newer 10-52T cassettes - Updated cage architecture provides better chain retention and precise shifts
SRAM GX Eagle Rear Derailleur
$125.00
The GX derailleur not only answers the Eagle drivetrain’s need for greater capacity, but it’s also the next evolution of SRAM's, 1x-specific X-HORIZON design. The larger, 14-tooth X-SYNC lower pulley allows 10- to 50-tooth cassette, and also adds to Eagle’s overall smooth-pedaling feel. SRAM's Type-3 ROLLER BEARING CLUTCH features a smoother torque curve for a quieter, more consistent operation and feel. CAGE LOCK has been moved back and out of the way, protecting it from trail debris. And a redesigned, robust mounting system further improves the Eagle derailleur’s performance and overall durability. - Mounting system and re-positioned Cage Lock offer greater durability - Sealed cartridge pulley bearings - Will not work with front derailleur drivetrains - Rear Derailleur Mount Type: 10x1 Standard - Drivetrain Speeds: 12 - Cage Length: Long - Chain Wrap Capacity (teeth): 40 teeth - Largest Cog: 50 - Weight: 290 g - Rear Der/Shifter Compatibility: SRAM X-Actuation
SRAM RED eTap Ceramic Bearing Rear Derailleur Pulleys
$150.00
SRAM's RED eTap Ceramic Bearing Rear Derailleur Pulleys run on super-smooth and efficient ceramic bearings so your drivetrain pedals with ease. They are also lighter than conventional pulleys. - Compatible with SRAM RED eTap derailleurs
SRAM Rival eTap AXS Front Derailleur
$175.00
The precision and reliability of eTap AXS, now at a whole new level. The Rival eTap AXS front derailleur is optimized for X-Range chainrings and uses Yaw technology, so there's no need for trim. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - AXS-enabled for easy personalization - Crisp and accurate front shifts - SRAM Yaw trimless cage technology optimized for use with 46/33T or 48/35T X-Range chainrings - Designed for standard chainline eTap AXS cranks - Battery Not Included
Page 1 of 3 Next page