Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more. - 15mm thru-axle with 110mm Boost spacing - Post-style brake mount - 1.5" tapered carbon steerer - Two sets of Three-Pack mounts - ASTM Condition 3 - For rough off-road riding and jumps less than 24"
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
A purpose built carbon fiber fork for gravel and cyclocross applications featuring internal hose routing, flat mount brake compatibility, and clearance for up to 50mm tires. This fork is perfect for gravel riders looking for more clearance, weight savings, compliance, and the versatility of fender mounts to enhance their gravel grinding experience. - Material: Carbon - Weight: 520g - Steer Tube Length: 350mm - Rake: 50mm - Axle To Crown: 395mm - Max Rotor Size: 140mm – 160mm - Max Tire Clearance: 700c x 50c, 27.5 x 2.25-inch - Crown Race Diameter: 1.5-inch - Torque Spec - Steer Tube: 5.5Nm - Torque Spec - Axle: 8Nm
- Forged dropouts with eyelets, straight-gauge oval tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - 85mm threaded section - Fits up to 30c tires - Axle to Crown Length: 382 mm - Brake Mount (Fork): Long Reach Caliper (55mm - 73mm) - Crown Race: 27 - Front Axle: 9mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill - Steerer Type: Straight - Weight: 839g, 876g, 907g - Wheel Size: 27"
The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. Offered in 26? and 700c wheel sizes, the fork’s new crown provides ample clearance for 700c x 50mm tires, and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 700c = 390mm - Offset: 45mm - Steerer: 700c (56–64cm frames) = 350mm - Tire Clearance: 700c x 45mm - Weight: 700c = 2.3 lb uncut
Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic. - 100% CroMoly steel construction, curved blades, powdercoated - Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown - 51mm IS disc brake mount - 26" has clearance for a 2.1" tire
The ECR fork is much like the Ogre fork. Both are CroMoly 29er forks. Both work with frames designed for 80mm-travel suspension forks. Both feature 51mm I.S. disc caliper mounts, brake line guides, accommodations for a rack and fender, and 2 sets of cage mounts (one on each leg) that let you mount large size or standard water bottle cages. Both are designed to run just about any combination of parts and accessories you'd want on a fork and are finished in durable black powdercoat. The only real differences are 1) ECR is disc brake only, and 2) ECR's offset is 47mm, 5mm more than Ogre's. - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8" straight - Tire Clearance: 29 x 3.0" - Weight: 3.1 lb (1.4kg) uncut
Designed around Surly's updated Krampus frame (but also employed on the updated Karate Monkey frames as well), this fork has 15mm thru-axle dropouts spaced at 110mm and clearance for up to a 29 x 3.0-inch tire. To accommodate such big tires it's got a longer axle-to-crown measurement than our Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3.0-inch - Weight: 1180g uncut
The Straggler fork is very much like the Cross-Check fork — it's a lugged and brazed CroMoly fork with room for 700c tires up to 50mm wide. Both feature fender and rack mount eyelets at the dropouts, mid-blade threaded rack mounts and threaded eyelets on the sides of the crown for accessories. Both deliver a resilient ride and are finished in black powdercoat. The Straggler fork is equipped with a 51mm I.S. disc caliper mount and no accommodation for rim brakes. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm, 1-1/8" straight (42-58cm), 350mm, 1-1/8" straight (60-62cm) - Tire Clearance: 50mm (w/o fender) Weight: 2.5 lb (1.15kg) uncut
The Ogre fork is non-suspension corrected and will run 29-inch as well as 27.5-inch tire options. Made of 4130 CroMoly, it's got 51mm IS disc mounts, removable cantilever pivots, brake-line guides, low-blade threaded barrel bosses and mid-blade eyelets for a rack. This fork is designed to run disc brakes, fenders and a rack simultaneously. It's got two sets of triple bottle mounts, one on each leg. - Axle to Crown Length: 447 mm - Brake Mount: Canti studs, IS Disc Brake 160 - Crown Race: 30 - Front Axle: 9mm x 100mm - Material: Chromoly Steel - Offset: 43 mm - Steerer Type: Straight 1-1/8-inch - Wheel Size: 29-inch, 27.5+ - Powdercoat finish
Like its QR cousin, the Disc Trucker Thru-Axle Fork is designed to mount racks and fenders and haul your worldly possessions. It's also got modern touches like dynamo routing, compatibility with flat-mount disc brakes, and three-pack mounts on both fork blades to satisfy your deepest cargo desires. Captured 12mm thru-axles make tool-free removal and installation possible. Offered in 26" and 700c wheel sizes, the Thru-Axle fork clears 26 x 2.1" or 700c x 47mm tires. With a 1-1/8" steerer, it's powder-coated and constructed using the same Chromoly steel as all our other frames and forks. Why? Because we swore a blood oath to steel and we intend to keep it. Note: The Disc Trucker TA Fork is designed to pair best with second-generation Disc Trucker models—those first released in 2020. Defy this guidance at your own peril. 26 Inch - Axle-to-crown: 376mm - Offset: 45mm - Steerer: 42–54cm frames = 300mm, 1-1/8" straight - 56–62cm frames = 400mm, 1-1/8" straight - Tire Clearance: 26 x 2.1" (with or without fenders) 700c - Axle-to-crown: 390mm - Offset: 45mm - Steerer: 56–64cm frames = 350mm, 1-1/8" straight - Tire Clearance: 700c x 47mm (with or without fenders)
This beaut here was designed alongside our Midnight Special Frame. In an effort to shed a few grams (it's for a road bike after all), we opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice—don't you think? Now, we don't throw the phrase "future-proof" around lightly, so we won't use it here either. What we will say is that, like the Midnight Special Frame, this fork is equipped with modern road standards like flat mount disc brakes and a 100mm x 12mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - Axle-to-crown: 400mm - Steerer: 350mm, 1-1/8" straight - Tire Clearance: 27.5" x 2.32" or 700c x 42mm (27.5 x 1.95" or 700c x 38mm w/fenders) - Weight: 1254g
Riding rigid isn’t for everyone, but for those who value functional simplicity, the updated ENVE Mountain Fork delivers. BOOST (15X110MM) - Material: Carbon - Accessory Mounts: Yes - Weight: 719g with Fender, 676g (w/ clasps) - Travel Correction: 120mm (Compatible with frames designed around 100mm-140mm Travel Forks) - Steerer Tube Length: 300mm - Rake: Adjustable – 44mm, 52mm - Axle To Crown: 490mm – 44mm Rake Position; 492mm – 52mm Rake Position - Brake: Disc - Brake Mount: Post Mount - Axle Compatibility: 15 x 110mm - Max Rotor Size: 180mm - Max Tire Clearance: 29 x 3.0” with Fender - Crown Race Diameter: 1.5” - Torque Spec: Steerer Tube: 5.5 Nm - Torque Spec: Axle: 8 Nm
The Firestarter carbon fork is made from high-modulus carbon fiber, built for all-terrain riding. Three-Pack mounts on each leg give you room for water or Anything Cages, and mid-blade mounts accommodate racks for panniers. This fork is light, tough, and ultra-versatile with the capacity to fit a wide range of tire sizes. - High modulus carbon fiber construction - Tapered 1-1/8" to 1-1/2" steerer tube - 160mm minimum rotor size; 180mm maximum rotor size - Mid-blade mounts for low rider racks - Compatible with wheel sizes: 27.5+, 29", 29+, 700c - Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles - BOOST 110 x 15mm thru axle included - Front Axle Size: 15 x 135L, TP=1.5, TL=10 - Internal routing for 110 BOOST dynamo hubs
The Waxwing Deluxe fork is designed to thrive on gravel. Its carbon-fiber construction is lightweight and soaks up micro-impacts on rough roads. The 12 x 100mm thru-axle keeps Waxwing stiff for steady tracking and responsiveness when dodging ruts, potholes, and road debris really matters. Waxwing Deluxe is compatible with both 700c and 650B wheels so you run your preferred size. Three-Pack mounts, mid-blade low-rider rack mounts, fender mounts, and internal dynamo hub cable routing add form and function. The Waxwing Deluxe fork is standard equipment on the 2019–2020 Warbird, and is available in a version painted to match the Warbird frameset. - Thru-Axle included - Axle-to-Crown Length: 405mm - Brake Type: Disc, flat mount, 160mm maximum rotor size, 42mm bolt length - Color: Black - S.H.I.S. Crown Race: 40mm, 36°, integrated crown race - Fork Rake: 50mm - Front Axle Type: 12mm thru-axle - Front Axle Size: 12 x 120mm, TP = 1.5, TL= 12mm - Front Hub Spacing: 100mm - Material: High-modulus carbon fiber - S.H.I.S. Clamp Diameter: 28.6mm - Steerer Tube Length: 350mm - Steerer Type: 1-1/8" to 1-1/2" tapered - Weight: 520g - Max tire size: 700c x 45mm or 650B x 51mm
Salsa Cro Moto Grande Fork 29". - Disc only 29" rigid fork - Suspension corrected for 80mm travel fork - Maxle Included - Axle to Crown Length: 483 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Material: Chromoly Steel - Offset: 45 mm - Wheel Mount Center Offset (mm): 0 - Steerer Tube Length (mm): 260 mm - Weight: 1080 g
The Cutthroat carbon fork is full of features, ready for any adventure. - Full Carbon fork, tapered steerer - Fits 29 x 3.0" tires - Three-Pack mounts - Crown light mount - Includes Salsa Deadbolt Ultralight Thru-Axle - Axle to Crown Length: 483mm - Brake Mount (Fork): Flat Mount 160mm - Color: Matte Black - Crown Race: 40mm - Defined Color: Black - Front Axle: 15mm Thru x 110mm - Material: Carbon - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6mm - Steerer Type: Tapered - Steerer Tube Length (mm): 350mm - Weight: 730g - Wheel Size: 29" , 29+ - Max Rotor Size (Fork): 180mm - Maximum Tire Clearance (Fork): 77mm
The Kingpin Deluxe fork is perfect for fat bike expeditions, keeping you nimble even when fully loaded. Dual Three-Pack mounts on each leg let you attach water bottles or Anything Cages, and mid-blade mounts fit low rider racks for panniers. Or, ditch the gear and hit the trails with an ultra-light and responsive fork. - High modulus carbon fiber construction - Tapered 1-1/8" to 1-1/2" steerer tube - 160 minimum rotor size; 203mm maximum rotor size - Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles - Mid-blade mounts for low rider racks - Internal routing for 150mm spaced dynamo hubs - Maximum Tire / Rim sizes: 26 x 5", 27.5 x 4.0", 29 x 3.0" - 150 x 15 mm thru axle included - Front Axle Size: 15 x 198L, TP=1.5, TL=9
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1pc drop outs for maximum strength and a super sleek finish. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and tire clearance for big tires. Lifetime warranty.
$144.99 - $169.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and plenty of tire clearance.
The Whisky No.9 MCX “monster cross” fork brings extra-wide tires to your drop-bar bike. How wide? The MCX accommodates tires up to 700c x 51mm or 650b x 61mm (that’s 2.4-inches). A relatively short 415mm axle-to-crown minimizes the geometry effects of a larger fork, and a 51mm offset improves toe clearance with large tires or fenders. The design draws from our CX forks, with lightweight carbon construction, a 12mm thru axle, and flat-mount brakes. Three-Pack mounts, dynamo cable routing, and fender mounts (700c x 45mm tire clearance with fender) add versatility for bikepackers and gravel riders. - 12 x 100mm thru-axle - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700c x 51mm or 650b x 61 mm max tire size - ASTM Condition 2 - For off-road riding and jumps less than 12-inches - Includes thru axle and Whisky Parts Co. compression plug
Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x38c/650x47c clearance
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 25mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
A carbon fork designed for bikepacking and endless exploration. Experience easier carrying of all possible accessories for everything from overnight endeavors to epic self-supported excursions with the ENVE Adventure Fork. The ENVE Adventure fork provides a lighter weight option for bikepackers and frame builders, while still maintaining reliability and strength. The dynamo light and charger routing is an integrated and protected solution to self-supported bike riders' needs. Finally, the fork chip option gives builders versatility in the fork by adjusting the axle-to-crown for different bike geometries for alternative bikepacking methods. In a market that's filled with heavy steel fork options, the ENVE Adventure fork offers bikepackers an opportunity to lighten their overall bike load through our trusted carbon fiber fork expertise. - Three-Pack Accessory Mounts - Fender and Rack Mounts - Reversible Drop-Out Chips for Adjustable Axle-To-Crown and Rake - Internal Dynamo Routing for Lights and Electronics Charging - Axle Spacing 12 x 100mm - Compatible Rotor Sizes 140mm & 160mm - 700 x 50mm Tire Clearance
There is beauty in simplicity and it's hard to argue with the simplicity of an unsuspended mountain bike. Despite its uncomplicated nature, ENVE's rigid Mountain Fork is loaded with unique features such as a removable fender, disc brake hose clip, and reversible axle inserts to fine tune the rake of the fork to match your ride preference and application. - Material: Carbon Fiber - Steerer Tube Length: 300mm - Rake: 44, 52 Adjustable - Axle to Crown: 470mm - Brake: Disc - Max Rotor Size: 180mm - Max Tire Clearance: 3.4-inch - Crown Race Diameter: 1.5-inch - Torque Spec: Steer Tube: 5.5 Nm - Torque Spec: Axle: 8Nm - Weight: 711g (w/ fender), 686g (w/ clasps)
$39.00 - $48.39
Economically priced hi-tensile steel MTB fork for 26-inch wheels. - Steerer Type: Threaded Steerer - Size: 1" (7/8 ID) - Steerer Length: 198mm - Rake: 45mm - Axle-to-Crown: 393mm - Race Diameter: 27mm - Axle: 3/8" - Thread Length: 95mm
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 32mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
The Whisky No.7 RD thru-axle fork is a thoroughly modern road fork for road bikes with tapered steerer tubes. It features a 12mm thru-axle for precise handling, clearance for high-volume road tires, and clean internal cable routing. Flat mount brake capability offers clean caliper fitment and backwards compatality with post mount brakes using adaptors. - 100 x 12mm thru-axle - 1-1/8 – 1.5" tapered steerer - 45mm offset
The Bridge Club fork is designed around the 27.5 wheel size with tire clearance up to 2.8, but is also capable of running 700c wheel setups with max tire clearance of 47c. It has 51mm I.S. disc caliper mounts and brake line guides as well. It only has the barnacles that matter most to the discerning bike tourist. The fork features upper and lower barrel bosses, one three pack mount on each leg, mid-blade eyelets, and rack mounts on the fork ends. - Axle-to-crown: 420mm - Offset: 43 - Steerer: 340mm - Tire Clearance: 71mm (2.8") - Weight: 1190g (2.62 lbs)
Page 1 of 2 Next page