Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Wheels Manufacturing Derailleur Hanger 61
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Notes: - PLEASE NOTE! M4 HOLES ON HANGER ARE NOT THREADED! - FRAMES USING THIS HANGER HAVE THREADS IN DROPOUT!
Wheels Manufacturing Derailleur Hanger 65
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (Long - Bolt Only)
Wheels Manufacturing Derailleur Hanger 70
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Dropout Savers
$33.00
Wheels Manufacturing Dropout Savers are designed to replace damaged threads in rear derailleur mounts. Made from aircraft quality steel, dropout savers provide an economical and reliable alternative to the "major surgery" of replacing a complete dropout. - Wide Dropout Saver (DS-1) fits dropouts thicker than 7mm - Narrow Dropout Saver (DS-2) fits dropouts 7mm or less in thickness - 2 pieces per bag
Wheels Manufacturing Socket Head Screw
$3.41
Replacement M3 x 10 Socket Head Screw fastener for derailleur hangers. - Thread: M3-0.5 - Thread length: 10mm - Use with 2.5mm hex wrench - Bag of 5
Thomson Seatpost Bolt Kit
$4.95
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut
TRP Rear Flat Mount Adapter
$15.99
Flat mount rear adapter for a 160mm rotor
Surly Singlespeed Spacer Kit
$45.00
Pair this kit with a cassette cog of your choosing (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. The Singlespeed Spacer Kit includes a variety of high quality aluminum spacers so you can dial your chainline and a stainless steel lockring to tighten everything down right.
Surly Straggler Frame Replacement Dropout Screws
$6.00
Replacement dropout screws for the Surly Straggler. - Bolt length: 40mm
Sunlite Alloy Seatpost Shims
$9.99
• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts
Sunlite Cartridge Bearings
$8.39 - $20.99
- DT Swiss cartridge bearings - Sold in pairs
Sunlite Derailleur Hanger
$4.99 - $46.99
- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact
Sunlite QR Seat Clamp
$12.99
• Aluminum • CNC-finished
Sunlite Safety Lock Seat Clamp
$12.99
• Forged 6061 T6 alloy clamp • Safety lever clamping position follows clamp • Stops the QR lever from catching on things • Black anodized finish
Sprindex Sprindex
$140.00
- Allows easy, tool-free adjustment of spring rate - Includes spring, adjuster, and 5 performance adapters - Lightweight (highest grade steel allows less material) - See https://sprindex.com/pages/compatibility for fitment details
Specialized Pave Clamp 7+9mm
$35.00
Re-engineered clamp with an optimized center-loaded bolt design equalizes load distribution to ease position adjustments. With this clamp set you will be able to clamp metal 7x7mm saddle rails and Specialized FACT carbon 7x9mm saddle rails. - 7x7mm and 7x9mm replacement clamp set for all Specialized road seatposts equipped with a single-bolt cylindrical wedge clamp design - New design clamp for better clamping and non-slipping of the saddle
Specialized Rear Rack Seat Collar
$15.00
Add a rack to your frame, even if you don’t have rack mounts. Allows standard rack stays to be bolted directly to the seat collar, for a clean and simple look. Made from lightweight aluminum for durability, with threaded inserts to bolt the stays directly into the seat clamp. - 35mm inner diameter fits all alloy Specialized MTB frame designs with 30.9mm posts and 35mm O.D. seat tubes. - 37mm inner diameter fits all carbon Specialized MTB frame designs with 30.9mm posts and 37mm O.D. seat tubes.
Shimano Deore XT M8000 Rear Derailleur Pulley Set
$27.49
Shimano Rear Derailleur Pulley Assemblies
Shimano Di2 E-Tube Wire
$46.00
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
Shimano Dura-Ace R9100 STI Lever Hoods
$19.99
If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano Dura-Ace STI Lever Hoods to make your bike feel new again. - Fits Dura-Ace ST-R9100 levers
Shimano Ultegra ST-6870 Di2 STI Lever Hoods
$18.50
Shimano Di2 STI lever hoods. - Fits Ultegra ST-6870 Di2 levers only
Salsa Alternator 1.0 Right Plate
$30.00
Replacement swing plates for Alternator 1.0 dropouts.
Salsa Derailleur Hanger
$20.00
Replacement derailleur hangers for Salsa frames. Mounting screws included. Hanger 257 Fits: Salsa Ala Carte Ti 2011, Salsa El Mariachi Ti 2010-2012, Salsa Fargo 2011-2013, Salsa Fargo Ti 2011-2013, Salsa Spearfish 2011-2013 with QR Rear Triangles, Salsa Vaya 2011+, Salsa Vaya Ti 2011-2012, Salsa La Cruz Ti 2011, Salsa Beargrease 2013, Salsa Warbird 2013-2015, Salsa Warbird Ti 2013-2015, Salsa Colossal 2013+, Salsa Colossal Ti 2013-2014, Salsa Mamasita 2012-2013, Foundry Chilkoot 2016 Hanger for 2014+ Split Pivot Frames Fits: all Split Pivot Horsethief, Pony Rustler, Spearfish Bucksaw and Deadwood Suspension Hanger for 2015 Beargrease 2 and Cogburn CB4 Fits: Cogburn CB4 and Salsa Beargrease 2 2015
Salsa Flip-Lock Seat Clamp
$37.00
Need a hand-friendly quick-release with some major bling? Then Salsa's Flip-Lock Seat Clamps are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette. - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - Integrated Flip-Off lever - 30.0 clamp for most Salsa steel frames - 30.6 clamp for most Salsa Scandium frames - For smooth operation, lightly grease the bolt threads and keep all parts clean
SRAM AXS RockShox Seatpost Controller
$215.00
The RockShox AXS controller ushers in the next generation of a clean cockpit with a completely cable-free design. With the touch of a button, operate the new Reverb AXS seatpost with less effort than ever before. Open up all the possibilities with AXS. - AXS app lets you customize configurations, monitor battery levels, update firmware and much more for all RockShox and SRAM AXS enabled components - Compatible with Matchmaker X - System is completely water and dust proof to IP69K
SRAM Flat Mount Disc Caliper Bracket Bolts
$6.00 - $24.00
Flat Mount Disc Caliper Bracket Bolts
SRAM GX 1X11 B Bolt and Limit Screw Kit
$16.00
- Rear Derailleur GX 1X11 B Bolt and Limit Screw Kit
SRAM Guide R/RE/DB5/Code R Lever Internals
$28.00
- Lever Internals Gen 2 Guide R/RE/DB5|Code R Qty 1
SRAM Guide RSC/Ultimate/Code RSC Lever Internals
$39.00
- Lever Internals Gen 2 Guide RSC/Ultimate|Code RSC Qty 1
SRAM IS Disc Brake Adaptor
$22.00 - $23.00
Disc Brake Adaptors - Includes Stainless Bolts