Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Shop Gear

nuun Nuun Endurance
$19.99 - $23.88
Breaking a sweat for more than 90 minutes? Drink Nuun Endurance! When you work out longer than 90 minutes your body needs more than water and electrolytes to keep up. Nuun Endurance is the perfect blend of electrolytes and carbohydrates to keep you hydrated and go longer and stronger all dang day. - Mix 1-serving into 16 oz. of water and consume while you work out for sustained hydration. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.
nuun Nuun Immunity
$4.99
Under the weather or on-the-go? Grab some Nuun Immunity! When your body is stressed with travel or fighting an illness, hydration and botanicals are crucial for maintaining immune health. Nuun Immunity is a potent blend of electrolytes, anti-inflammatories, and antioxidants that provides total immune system support. - 10 tablets per tube. Dissolve in 16 oz. of water. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.
nuun Nuun Recover
$34.99 - $35.88
Don’t let your recovery window slow down your progress. For accelerated workout recovery, our bodies need nourishment. Jumpstart your muscle repair and rehydration with Nuun Recover’s all-star combination of Vegan BCAAs, electrolytes, L-Glutamine, and efficient carbohydrates. Vegan - Our 3:1:1 VEGAN BCAA blend intensifies your protein potency, delivering the muscle recovery benefits of 30g of protein. - Mix one serving of Nuun Recover with 16oz of water and drink immediately after your workout to begin rehydration. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.
nuun Nuun Sport
$5.99 - $6.99
Breaking a sweat? Grab some Nuun Sport! When you sweat, your body loses vital minerals and electrolytes that need to be replaced for healthy recovery and lasting performance. Nuun Sport provides a great balance of ingredients for mineral replenishment and optimal hydration before/during/after your workout. - 10 tablets per tube. Dissolve in 16oz. of water. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.
iSSi Flash III
$105.00 - $120.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options. - Spindle Type: Flip III: Triple Bearing - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included
iSSi Thump (Replaceable Pins, Small)
$50.00
Built to handle the rigors of riding off-road, the concave shape and tall pins of the Thump composite pedal provide the perfect balance of traction and comfort for a range of applications. The Thump RP version comes with replaceable steel pins that provide solid traction when the trail gets hairy. Two different platform diameters accommodate a range of shoes sizes for a more personalized fit. - Tough, nylon composite body - Chromoly spindles, sealed cartridge bearings, and nylon bushings - Body: 18.5mm thick with 2.5mm of concavity for great control and comfort - Pin height: 3mm out of the box. Remove the 2mm washer under the pin head to convert to 5mm pin height. - Platform size: 113 x 95mm
iSSi Trail II Pedal
$105.00 - $110.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution.
absoluteBLACK Oval Direct Mount 1x Chainring for CINCH
$89.99 - $94.99
absoluteBLACK Oval Direct Mount 1x Chainrings for CINCH greatly improve traction and climbing abilities. They are designed for Easton EC90SL cranks or Race Face cranks that utilize the CINCH system. The super-stiff design is well suited for cyclocross and gravel riding. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-12.1%, with timing of 110.5-112.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio
Zipp Zipp Tangente Valve Extender - Threaded Core
$14.00
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
Yokozuna Alloy Presta Valve Cap
$60.99
- Premium alloy presta valve caps in an array of colors
Yakima BackSwing
$299.00
Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)
Wolf Tooth Components 64/104 Chainring
$59.95 - $69.95
- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)
Wolf Tooth Components Direct Mount Chainrings for Race Face Cinch
$69.95 - $79.95
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Elliptical Direct Mount Boost Chainrings for SRAM Cranks
$69.95
The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Boost: 3mm offset for 52mm chainline - Mount type: Direct Mount for SRAM - Offset: Boost - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains
Wolf Tooth Components GoatLink
$24.95
Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain. - Optimized for using a Shimano XT 8000 or XTR 9000 Rear Derailleur with a 10-42, 10-44, 11-45, 11-46 rear cassette setup - Compatible with M8000 (XT) and M9000 (XTR) series eleven-speed Shimano rear derailleurs - Double chainrings are not currently supported - Triple chainrings are not supported - Direct Mount-native frames and SRAM derailleurs are not supported
Wolf Tooth Components Master Link Combo Pliers
$32.95
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
Wolf Tooth Components ReMote Dropper Post Lever
$69.95
The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics
Wolf Tooth Components Roadlink Direct Mount
$29.95
The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano’s current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It’s an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs - CNC machined from 6061-T6 aluminum with stainless steel bolt - Does not change the derailleurs total chain wrap capacity - Fits standard derailleur hangers only - Best used with Single or Double Setups - see manufacturer's site for more details
Willworx Superstand Bike Stand
$39.90 - $51.90
- Shop quality bicycle display and storage stand - Graphite ripple powdercoat over steel construction - Four-Point, Foam rubber end-Cap feet - 2 Piece design disassembles for space-Efficient storage - Standard and extreme models feature welded base construction (Extreme model accepts up to 3 inch tires) - Retail model features flat-Packed, Bolt-Together base construction - Fat rack features flat-Packed, Bolt-Together base construction and will suit tires from 3.8" To 5" with three width positions, 4.25", 4.75" And 5.25"
White Lightning Wet Ride
$7.99 - $12.99
Rain, sleet, hail, snow, no matter what form it comes in, water can reek havoc on your drivetrain. Fortunately, White Lightning's Wet Ride is designed to meet the demands of riders who traverse soggy terrain and ultra-long distances. This heavy bodied lube is made of premium synthetic oils and water-repelling polymers so it's 100% waterproof and unwaveringly durable. Dirt loving riders will appreciate how well it counteracts the effects of mud and every cyclist will appreciate the anti-corrosion additives that even protect during wet, winter commuting.
Whisky Parts Co. No. 7 Stem
$40.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
Wheels Manufacturing Inc. 386EVO Angular Contact Bottom Bracket for 24mm Shimano Cranks
$115.00
Thread together BB for 386EVO frames and 24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: BB386EVO, BB392EVO - Bottom Bracket Shell Width: 86.6mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 24mm - Over Bearing Width: 91.5mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Weight: 133g
Wheels Manufacturing Inc. BB30 ABEC-3 Bearings & Clip Kit
$35.00
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings
Wheels Manufacturing Inc. Ball Bearing Retainer
$4.95 - $17.50
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
Wheels Manufacturing Inc. CN-R083 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Joy U, KK 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 15mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - JoyTech, Joy U, KK 9mm x 1, front hub - Taiwanese front hubs with 9mm x 1 axle
Wheels Manufacturing Inc. Crank Spindle Spacer
$10.75
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag
Wheels Manufacturing Inc. Derailleur Hanger 11
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 12
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws
Wheels Manufacturing Inc. Derailleur Hanger 144
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 219
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Page 1 of 265 Next page